For rotatable mounting of an electromagnet.

Equipment and Technical Data

• Inclination-adjustable metal base plate on adjustable feet. Lockable metal plate with ball bearings on top.
• Table top diameter: 220 mm.
• Table height: approx. 100 mm.

To generate a homogeneous magnetic field, using 2 pieces together with electromagnet (06480.01).

Equipment and technical data

• Length: 135 mm.
• Diameter: 39 mm.

Electromagnet w/o pole shoes for generation of strong magnetic fields together with differently shaped pole pieces.

Equipment and technical data

• U-shaped iron core with coils for parallel and series use.
• Clamping device with threaded drive for sensitive air gap adjustment with pole piece 06480.02
• Turns per coil: 842
• Admissible permanent current: 4 A
• Max. current: 5 A (short term)
• Resistance per coil: 2.66 Ohm
• Flux density (for l=5A) with 2 pole pieces 06480.02 with 2.5 mm air gap: approx.1.3T
• Weight: approx. 17 kg
• Dimensions: 350 x 140 x 180 mm

Measurement device for applications in mechanics and radioactivity. Measures time, frequency, pulse rates, pulse counting, periodic times, speeds and velocities.

Benefits

• The device has all the qualities that are expected of a modern universal counter and is also equiped with a number of technical specifics of how it specifically arise from the requirements of science teaching practice.
• For the scientifically correct representation of each measurement is shown in principle with the associated unit. With the overflow of the display is automatically switched into the next area.
• Before the measurement starts it can be manually adjusted to a maximum of 6 decades defined range, e.g. to suppress is not physically meaningful digits on the display.
• A special jack for direct connection of a GM counter tube is available for radioactivity experiments. The required voltage can be changed manually to determine the characteristics of a counter tube too.
• The stopwatch function can be entered by means of electrical contacts, sensors, or manually in the various types of triggers for the precise starting and stopping for time measurement.
• The measured values are represented by six red 20mm high-contrast 7-segment displays. An additional three-digit display is used to display the unit (ms, s, Hz, kHz, MHz, I / s, RPM, Imp, V, m / s).
• The various operating states are indicated by LEDs.
• Range switching in all modes manually (before measurement) and automatically when an overflow.
• USB port is used for firmware update of the device.

Equipment and Technical Data

• Operating temperature range 5…40 ° C
• Relative humidity <80%
• Digital display:
  • Measurement reading LED 6-digit, 7-segment, 20 mm
  • Units LED 3-digit, 5×7 dot matrix
  • Units ms, s, Hz, kHz, MHz, I / s, RPM, Imp, V, m / s
• Signal Input: signal bandwidth 0.1 Hz .. 10 MHz
• Counter tube input voltage 150 V. .. 660 V (factory setting: 500V) with manual adjustment
• Photoelectric output for power supply of 5 V sat. max 1 A
• Stopwatch 0.000 … 99,999.9 s, resolution 1 ms
• Timer 0.000 ms … 3999.99 s, resolution1µs
• Velocity 0.000 m/s…9999.9 m / s, resolution 0.001 m / s
• Period measurement 0.000 ms … 99.9999 s, resolution 1µs
• Frequency measurement 0.00 Hz .. 9.99999 MHz, resolution 10 mHz
• Speed measurement 6. .. 99,999 RPM, 1 RPM resolution
• Pulse counting 0. .. 999,999 Imp
• Pulse rate measurement 0.0 … 99,999.9 I / s
• Mains supply: Mains voltage 110 .. 240 V, 50/60 Hz, 20 VA
• Dimensions: 370 x 168 x 236 mm

Helmholtz coils, one pair to generate a homogeneous magnetic field. Especially with narrowbeam tube for e/m determination.

Equipment and technical data

• Two identical coils each on standbase
• connections 4 mm safety sockets
• Coil diameter: 300 mm
• Number of windings: each coil 124
• Coil resistance: 1,2 Ohm
• Max. current per coil: 5 A
• Max. flux density (5 A): 3.7 mT

Spectral tubes are secured with these holders to two insulating supports which are mounted on a stand.

For generation of line spectra and in connection with a suitable filter to produce monochromatic light.

Equipment and technical data

• Nominal current intensity: 1.2 A
• Burning position: vertical
• Socket: E27
• Type: Na
• Luminating area (mm): 15 x 8

Holder for mounting the IMPACT fine beam tube inside the Helmholtz coils.

Benefits

Exact fit according to the dimensions of the Helmholtz spools.

Equipment and Technical Data

• Material: PVC with aluminum holder
• Dimensions: 19.5 x 4.5 x 6 cm